Victoria - 800
This Victoria 800 Cutter is a very attractive boat presented in good condition. With her traditional long keel, she is a safe & sea kindly cutter rigged yacht that is perfect for weekend & offshore cruising. Having been owned by her current owners for 15 years, she has clearly been well looked after and has much to offer her new Owners. With 4 berths including forepeak cabin, a comfortable saloon, galley & separate heads, this Victoria 800 is a comfortable cruiser. Fitted with a powerful 20 horsepower Beta Engine, instead of the usual 10 hp option, it has been very regularly serviced and is capable of punching against the tides. Although original, her 3 sails have been regularly laundered and are in good serviceable condition. This Victoria 800 Cutter is a lovely looking boat with stunning lines that are complemented by teak decks, all of which are sure to bring a smile to her new owners. She is lying Southampton.
Stock Number : ABS 1918
Year : 1997
LOA : 7.92 m
LWL : 6.50 m
Beam : 2.50 m
Draft : 1.17 m
Displacement : 3100 Kg
Ballast : 1600 Kg
Keel Type : Long Keel
Engine : 1 x Beta 20 – 20 HP
Fuel Tank : 55 Ltr
Water Tank : 150 Ltr
No of Berths : 4
VHF : NASA SX35 VHF with DSC Capability
Wind Indicator: Autohelm Wind Speed & Direction
Tridata : Autohelm Speed, Depth & Log
All interior joinery is a blend of solid teak, teak veneered plywood, plastic laminate covered plywood and light hardwood strip planked panels. The deckhead and coachroof sides are lined with a laminate of a soft white colour. The same laminate is used in areas of high wear enabling easy cleaning. The cabin sole is of teak and holly veneered marine plywood. Solid teak handrails are strategically placed throughout the interior for practicality at sea. Berths and seats are deeply upholstered with combustion modified high resilience foam with an under-thigh support roll. Lee cloths port and starboard. Cabin/cockpit table.
Single full length berths port and starboard Double berth infill cushion for the forecabin. Lockers under each berth with access through the top. Overhead hatch for ventilation and safety opening portlight for ventilation Access through a door to chain locker.
Five opening portlights 2 settee berths fitted with lee cloths, Under berth stowage with two access hatches through top of each berth. Outboard of the settees, demountable upholstered backrests providing access to lockers behind. Outboard over the backrests, deep stowage shelves with deep fiddles. Large dry hanging locker starboardside adjacent to the companionway.
Work surfaces are covered with a plastic laminate and fitted with deep teak fiddles. Sink tap and hand pump for fresh water, Insulated icebox of moulded GRP Stainless steel cooker with oven and grill.
The compartment is based on a fibreglass moulding to enable easy cleaning. Marine toilet which flushes and discharges overboard. Hand basin with fresh water hand pump and overboard discharge.
Built by Victoria Yacht (Hampshire) and completed in 1997. Hand laid fibreglass using chopped strand mat and woven rovings to Lloyds specification. This incorporates a non-slip pattern and balsa core sandwich construction on all horizontal surfaces, the balsa core is replaced with coremat pads where deck equipment is fitted. Teak deck.
Fresh water cooled 20hp 3 cylinder Beta 20 diesel engine flexibly mounted on re-enforced engine bearers. Shaft drive.
Custom made switch panel with 8 circuit breaker switches clearly engraved with their individual function. Battery isolator switch.
Silver mast (Cutter) with slab reefing mainsail, furling genoa & staysail. All sails are original but regularly laundered and in good serviceable condition.
S/S Standing Rigging – Original
Autohelm Wind Indicator
Autohelm Tridata – Speed, Depth & Log
NASA SX35 VHF with DSC Capability
CQR anchor with chain and warp
Fenders and warps
2 Lewmar st. primary winches
2 Lewmar secondary winches & 1 Lewmar secondary winch (on mast)
This Victoria 800 Cutter Rigged Cruiser is a boat that has clearly been loved and cared for by her current owners of 15 years. With her traditional long keel, she is extremely stable and very capable of whatever the weather may throw at her and with her 20 horsepower Beta engine, she is also able to motor confidently against the tides. She comes with Speed, Depth & Wind Instruments as well as a DSC capable VHF radio, 4 comfortable berths, lovely saloon with two long sofas, galley with oven, Grill & Hob and separate heads compartment. Her 3 sails have been frequently laundered and although original, are still in good serviceable condition with plenty of life left in them. This is definitely a boat that will be loved and become part of a family and one that will attract attention wherever she sails
This Victoria 800 Cutter is a very pretty yacht with attractive lines that are complemented by her beautiful teak decks that some have described as a “Modern Classic”. Having been built in Southampton, she is perfect for UK Coastal waters but very capable of going much further afield. This particular boat is a good example of this stunning Cruiser and is a must for viewing. She is currently lying Southampton.